4. Turn on the headlight if needed or desired. Turn on the light directly is the light button on the right hand.
5. Select the desired level of pedal assistance (PAS) between level O through 5 using the up and down arrows on the display remote.
Level 1 corresponds to the lowest level of pedal assistance, and level 5 corresponds to the highest level of pedal assistance. Level O
indicates pedal assistance is inactive. Start in PAS level O or 1 and adjust from there.
6. Begin riding carefully. With the proper safety gear and rider knowledge, you may now operate your bike from Shengmilo. On a flat
surface, in a low gear (1 or 2), most riders should be able to begin pedaling the bike with pedal assist level O or 1. You may also use the
throttle to accelerate and maintain your desired speed.
7. Turn on switch for the throttle before riding. The throttle is used by slowly and carefully
rotating the throttle backward, toward the rider. The throttle is active when the switch is turned
on.
Do not use the throttle while dismounted. Avoid accidental application of the throttle while
dismounted; anytime you are moving the bike while dismounted, ensure the bike is powered
off to prevent accidental application of the throttle.
NOTICE: Even if you are an experienced bike user, please take the time to read and implement the guidelines described in the owner's manual
accompanying your ebike by Shengmilo, and any manuals included with each subcomponent.
To Next Page
Loading...
