Recommended Service Intervals
Regular inspection and maintenance are key to ensure Shengmilo function as intended, and to reduce wear and tear on their systems. Recommended
service intervals are meant to be used as guidelines. Real world wear and tear, and the need for service, will vary with conditions of use. We generally
recommend inspections, service, and necessary replacements be performed at the time or mileage interval that comes first in the following table.
Weekly, 100-
200 mi (160-
321 km)
-Check hardware for proper torque: See
Recommended Torque Values chart.
-Check drivetrain for proper alignment and function
(including the chain, freewheel, chainring, and
derailleur).
-Check wheel trueness and for quiet wheel operation
(without spoke noise).
-Check condition of frame for any damage.
-Clean frame by wiping frame
down with damp cloth.
-Use barrel adjuster(s) to tension
derailleur/brake cables if needed.
-Replace any components confirmed
by Shengmilo Product Support or a
certified, reputable bike mechanic to
be damaged beyond repair or broken.
Monthly, 250-
750 mi (402-
1207 km)
-Check brake pad alignment, brake cable tension.
-Check bike is shifting properly, proper derailleur
cable tension.
-Check chain stretch.
-Check brake and shifter cables for corrosion or
fraying.
-Check spoke tension.
-Check accessory mounting (rack mounting bolts,
fender hardware, and alignment).
-Clean and lubricate drivetrain.
-Check crankset and pedal
torque.
-Clean brake and shift cables.
-True and tension wheels if any
loose spokes are discovered.
-Balance the battery.
-Replace brake and shift cables if
necessary.
-Replace brake pads if necessary.
Every 6 Months,
750- 1250 mi
(1207-2011 km)
-Inspect drivetrain (chain, chainring,freewheel, and
derailleur).
-Inspect all cables and housings.
-Standard tune-up by certified,
reputable bike mechanic is
recommended. -Grease bottom
bracket.
-Replace brake pads.
-Replace tires if necessary.
-Replace cables and housings if
necessary.
To Next Page
Loading...
