Sherbourn CD-1 - Important Safety Precautions and Explanation of Symbols; Explanation of Safety Symbols; General Safety and Installation Guidelines; Electrical Safety and Power Precautions

Important Safety Precautions and Explanation of Symbols
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important installation, operation, and service instructions in this manual.
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated dangerous voltages within the enclosure that may
be of sufcient magnitude to constitute a risk of electrical shock to the user.
Please read this Installation and Operation Manual thoroughly before attempting to install,
congure, or operate the CD-1. After successful installation and conguration of the CD-1,
be sure to retain this manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and
follow all instructions and heed all warnings on the CD-1 in this manual. The vast majority
of the subsequent safety precautions are common sense. If you are not comfortable with
the installation of audio/video entertainment equipment, you should seek the services of a
qualied installation professional or call us for help.
WARNING: To prevent the risk of re or electric shock, do not use the CD-1 near
water or in wet locations and do not expose it to rain or moisture. Doing so may
result in damage to the CD-1 and the risk of electric shock, which may result in
bodily injury or death.
CAUTION: To reduce the risk of electric shock, do not remove the cover from the
CD-1. There are no user-serviceable parts inside the CD-1. Refer all service to
qualied service personnel.
Do not install the CD-1 near any heat sources such as radiators or heating vents. Avoid
installing the CD-1 directly above other heat-generating equipment unless sufcient
ventilation or forced-air cooling is provided.
Do not install the CD-1 in locations without proper ventilation. The CD-1 should not be
operated on a bed, sofa, rug, or similar surface that may block vents. The CD-1 should not
be installed in an enclosed location such as a bookcase, cabinet, or closed equipment rack
unless sufcient forced-air ventilation is provided.
Connect the CD-1 only to power sources of the correct voltage (as shown in this manual
and on the CD-1). Ensure that the Input Voltage selector switch on the rear of the CD-1 is
set to the appropriate voltage.
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be
especially careful where the power cable enters the power outlet and CD-1 unit.
Only connect the CD-1 to an electrical outlet or extension cord of appropriate type and
rating. DO NOT defeat the safety purpose of a grounding or three-pronged plug by
removing ground pins or using unsafe adapters. If you replace the CD-1 power cord, only
use one of similar type and equal or greater current rating.
The power cable for the CD-1 should be unplugged from the outlet during severe electrical
storms, or when unused for a long period of time.
Only replace the fuse in the CD-1 with a fuse of proper value and voltage rating.
!
!