Need help?Do you have a question about the Sherman digitec ACDC TIG 315GD and is the answer not in the manual?
General| Welding Method | TIG, MMA |
|---|---|
| Output Current Range (TIG) | 10-315A |
| Frequency | 50/60 Hz |
| Arc Ignition | HF |
| Rated Output Current (TIG) | 315A |
| Open Circuit Voltage | 70V |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Protection Class | IP21S |
| Duty Cycle (MMA) | 60% @ 315A |
| Cooling System | Fan |
| Input Voltage | AC 3x400V 50Hz |
| Duty Cycle (TIG) | 60% at 315A |
General warning about equipment usage.
Required qualifications for welding personnel.
Pre-welding safety checks and regulations.
Measures to prevent electrocution during welding.
Protective measures against electrical arc hazards.
Measures to prevent poisoning from vapors and gases.
Precautions to prevent burns during operation.
To Next Page
