Why is there no sound coming from my Sherwood CD Player?
If your Sherwood CD Player is producing no sound, ensure that all connections are correctly made and that your amplifier/receiver is operating correctly. Also, check if the pause mode is activated, indicated by the illuminated “ ” indicator. If so, press the “ ” button to cancel the pause mode.
What to do if my Sherwood CD-772 sound skips?
If the sound skips on your Sherwood CD Player, try playing another disc to rule out defects or deep scratches on the current one. Also, ensure that the unit is placed on a stable surface free from vibration or physical shock.
Why does my Sherwood CD Player have poor or distorted sound?
If your Sherwood CD Player has poor or distorted sound, the unit might be incorrectly connected to the PHONO input jacks of the amplifier/receiver. Make sure the connections are correct. Also, check all connections and ensure all cords are securely connected.
How to fix a Sherwood CD-772 CD Player with no power?
If your Sherwood CD Player isn't turning on, ensure that the AC input cord is securely connected. Also, verify that the POWER switch is pressed to the ON position.
What to do if my Sherwood CD Player shows no play?
If your Sherwood CD Player isn't playing discs, make sure the disc is loaded with the printed side up. Clean the disc if it's dirty. If the disc is defective or deeply scratched, try loading another disc. For CD-R/CD-RW discs that are nonstandard, refer to "Unplayable discs" on page 10.
Why is programming not working on my Sherwood CD-772?
If the programming function does not work on your Sherwood CD Player, ensure that the disc is free from scratches and dirt. If the disc is clean, try the programming procedure again. Also, verify that the number of programmed tracks is not more than 20.
Why does it take so long to read Audio CD or MP3 disc on my Sherwood CD Player?
It may take a longer time to read Audio CD/MP3 disc with many tracks, etc. This is not mulfunction.
Typical Audio Performances| number of channels | 2 |
|---|---|
| frequency response | 20~20, 000 Hz ±0.5 dB |
| signal to noise ratio | 103 dB |
| dynamic range | 100 dB |
| total harmonic distortion | 0.006 % |
| audio output level | 2 V RMS |
| digital output optical wavelength | 660 nm -15 ~ -20 dBm |
Optical Readout System| laser type | Semiconductor AlGaAs |
|---|---|
| wavelength | 760~800 nm |
| numerical aperture | 0.45 |
Signal Format| sampling frequency | 44.1 kHz |
|---|---|
| d/a conversion | Multibit (Sigma-delta conversion) |
| oversampling | 8 times |
General| power supply usa and canada | 120 V ~ 60 Hz |
|---|---|
| power supply europe and australia | 230 V ~ 50 Hz |
| power supply china | 220 V ~ 50 Hz |
| power consumption | 20 W |
| dimension | 440×130×355 mm (17-3/8×5-1/8×14 inches) |
| weight | 8.9 kg (19.6 lbs) |
To Next Page
