If when using the Quickshifter the gearbox seems to push back the shift lever, the shift feels
rough and you have experienced missed gears - this means that the gearbox needs more time
to react-turn the adjuster clockwise for more time.
If when using the Quickshfiter the motorcycle front dives for too long and the shift seems slow
- this means that you have to lower the shift time - turn the adjuster anticlockwise for less
time. Best results for most motorcycles are achieved with the following time settings - (60ms-
70ms).
NOTE: : Before changing the factory setting make sure to remember the length of the Shift
Time, so that you will be able to set it back and have a good starting point. If you want to
switch OFF the Full Race Unit functions for any reason, unplug the Shift Sensor from the Full
Race Unit control box.
The Quickshifter has a threshold RPM which means that the engine speed must exceed the
minimum threshold in order to activate the Quickshifter function. The factory setting are over
3000RPM and this is not adjustable.
If for some reason you're experiencing difficulties adjusting your Shift Power product, you
think it is not functioning as expected or you would like to share your opinion please feel free
to contact us to support you with a professional help.
Web: www.ShiftPower.co.uk Email: info@ShiftPower.co.uk
This product is covered by one year warranty against malfunctions from the original date of
purchase under the following conditions: https://shiftpower.co.uk/terms
Warranty disclaimer:
Shift Power Ltd shall not under any circumstances, be liable for any special, incidental or
consequential damaged including, person, party or property, but not limited to, damage loss of
cost of purchased or replacement goods or service, claims of customers of the purchaser,
which may arise and/or result from sale or use of these parts. Installation of these parts could
adversely affect the engine manufacturer warranty coverage.
Thank you for using the SP-Full Race Unit!
To Previous Page
Loading...