Shift Moonwalkers - Learning to Moonwalk; How to Adjust Moonwalker Straps

10 11
4. Now connect the magnetic buckle of the forefoot strap and tighten the strap.
5. Connect the magnetic buckle to the toe strap and tighten it.
6. Repeat for the other shoe.
7. Pull the textile strips connected to the quick-release magnetic buckles to remove the shoes.
No need to undo the heel strap.
WARNING - Always Wear A Helmet - Always wear an ASTM, CPSC, and/or CE certied
Helmet until you master all skills necessary to safely use your Moonwalkers, including being
able to stop quickly or in an emergency, comfortably go up and down hills and stairs, make
sharp turns, and can operate comfortably at top speed. If you allow others to use your
Moonwalkers, ensure such users always wear a certied Helmet.
TIP: The straps must be tight to your shoe, with your shoes securely tting your foot. A loose t
will reduce the algorithm’s performance. Think of it as a tight hug, similar to a cycling shoe, ski,
or snowboard boot.
TIP: After your rst use, the heel strap will not need to be adjusted unless your shoes vary
signicantly in the heel region (thicker or thinner padding).
4. Learning Moonwalking
Powering on the Moonwalkers
Hold the buttons on the back of the shoes for 3 seconds. The shoe status lights will enter a
white breathing-type pattern. The Moonwalkers will begin to communicate with each other,
and the white light will turn solid when they are connected and LAID FLAT on the ground. The
wheels are now locked and will not roll anywhere. You can now place your feet on the shoes and
adjust the straps.
Adjusting the Straps
WARNING-Pinch Points-Keep ngers, hair, clothing, shoelaces, and jewelry away
from the motor, wheels, and toe plate hinge.
Just as you put on your regular shoes, do one at a time.
1. For your rst use, loosen the heel strap completely and unclip the magnetic buckles at the
toe and forefoot locations.
2. Place your foot on the Moonwalker and align the ball of your foot with the hinge line near
the Shift logo on the grip surface.
3. With your foot in the correct position, adjust the heel strap to be snug around your heel.