Shihlin electric SPM-3 User Manual

_________________________Shihlin Electric SPM-3 User Guide__________________
15
C8: Reset Voltage Eligibility Rate – Yes or No
C8
RST
VER
NO
4.3.3 Alarm Setting (A)
A1: Enable Alarm – On or Off (Default OFF)
A1
ALRM
OFF
A2: Enable Buzzer – On or Off (Default OFF)
A2
BUZZ
OFF
A3: DO1 can be assigned as the alarm output, and the following choices can be selected:
「None」、「Any」、「Over
V」、「Over I」、「Over F」、「Over Dmd」、「Over V」、「Under I」、「Under F」(Default None)
A3
DO1
ALRM
NONE
A4: DO2 can be assigned to output「PULSE」or「ALARM」(Default PULSE)
A4
DO2
OUT
PUT
PULSE /ALARM
A5: If DO2 is assigned to「ALARM」, select from the following: 「None」、「Any」、「Over V」、「Over
I」、「Over F」、「
Over Dmd」、「Over V」、「Under I」、「Under F」(Default None)
A5
DO2
ALRM
NONE
A6: If DO2 is assigned to「PULSE」, select from the following:「NONE」、「kWh」、「kvarh」、「kVAh」
(Default
NONE)
A6
PULS
OUT
PUT
NONE
A7: If DO2 is assigned to「PULSE」, pulse rate can be set from 1 to 6000, 1 stand for
0.1kwh/pulse
(Default 10)
A7
kh
0001
A8: Over Voltage Alarm – 「ENABLE」or 「DISABLE」(Default DISABLE)
A8
OVER
V
DISABLE

Shihlin electric SPM-3 Specifications

General

Brand	Shihlin electric
Model	SPM-3
Category	Measuring Instruments
Language	English