Shimadzu Bransist Alexa

Questions and Answers

J
James BuckleyAug 3, 2025
What to do if I get cache space reservation error messages on my Shimadzu Medical Equipment?
- L
  Luis GrayAug 3, 2025
  If you encounter error messages related to cache space reservation, here are some possible solutions: * If you're using CD-R or DVD-R media for patient data archives, archive all unsaved patient data to new CD-R or DVD-R. * Insert a blank CD-R or DVD-R and try the operation again. * Ensure the media is correctly inserted. * Verify that you are using writable media. * Input an appropriate value. * Insert DICOM media.
L
Lisa WileyAug 9, 2025
How to fix a shutdown failure on my Shimadzu Medical Equipment?
- Y
  yhoodAug 9, 2025
  If your Shimadzu Medical Equipment fails to shut down, try the following: * Press and hold the Power button for at least 5 seconds. * Alternatively, open the switch cover on the front of the cabinet and press the Power button for at least 5 seconds.
T
Terry ThorntonAug 15, 2025
How to reset the emergency halt on Shimadzu Medical Equipment?
- C
  Caleb WalkerAug 16, 2025
  To reset the emergency halt on your Shimadzu Medical Equipment: * Turn the Stop switch clockwise. * After doing so, make sure the message "Stop Mode: Reset OK" is displayed on the X-ray generator console or the information display. This ensures normal operation.
J
Jennifer ThomasAug 21, 2025
How to halt the C-arm on Shimadzu Medical Equipment?
- J
  Jesus WallaceAug 21, 2025
  To halt the C-arm on your Shimadzu Medical Equipment, press the Stop switch.
M
Michele PopeAug 27, 2025
What to do if I get messages related to the X-ray Tube on Shimadzu Medical Equipment?
- J
  James FrazierAug 27, 2025
  If you receive messages related to the X-ray tube, either change the radiography conditions or stop operation until the heat unit value decreases.

Summary

System Components

Examination Room

Overview of components within the examination area.

CyberGrip

Details the controls and functions of the CyberGrip device.

Cyber Console

Details the controls and functions of the Cyber Console.

Local Console

Explains the controls of the Local Console (Type A and Type B).

IVR NEO

Details the buttons and joystick functions of the IVR NEO controller.

Control Room

Overview of components located in the control room.

X-ray Generator Console

Details the functions and controls of the X-ray Generator Console.

System Startup and Shutdown

Startup

Describes the procedure for starting up the system.

X-ray Tube Warm-up

Details the process for warming up the X-ray tube.

Shutdown

Explains the procedure for shutting down the system.

Daily Inspection

Lists the checks required for daily system inspection.

Start Study

Input Patient Information

Details how to input patient data to start a new study.

Fluoroscopy;Radiography

Operation of C-arm

Explains how to operate the C-arm using different control devices.

Operation of Catheterization Table

Details the horizontal movement and vertical adjustment of the catheterization table.

Fluoroscopy

Describes the basic procedures for performing fluoroscopy.

Radiography

Describes the basic procedures for performing radiography.

Change Fluoroscopy;Radiography Program

Explains how to modify preset fluoroscopy and radiography parameters.

HV Flip

Describes how to flip images horizontally or vertically.

Change Settings of Injection Delay

Details how to adjust injection-acquisition and mask-acquisition delays.

Recording Fluoroscopy Image

Explains how to record fluoroscopy loops.

Adjusting Image

Covers image brightness, contrast, sharpness, and flipping.

Playback

Explains how to adjust playback speed and modes.

Adding, Deleting and Displaying Reference Images

Details managing reference images for comparison.

Related Operation for Study

Covers study management functions like opening and closing studies.

Measuring and Analyzing

Introduces Quantitative Coronary Analysis (QCA) and Left Ventricle Analysis (LV).

Operating DSA Tool

Explains how to use the DSA Tools and Pixel Registration.

Printing Images

Describes the process of printing acquired images.

Closing Study

Explains how to close the current study.

Studies Management

Managing Studies

Describes how to view, search, and manage patient studies.

Sending Studies

Explains the procedure for sending studies to other servers or systems.

Writing to CD;DVD

Details the process of writing studies to CD/DVD media.

Trouble Shooting

Emergency Halt

Procedures for halting the C-arm and resetting emergency stops.

Safety Switch Operation

Explains the function of safety switches and how they operate.

Shutdown Failure

Steps to take if the system shutdown fails.

Application Problems

Addresses issues like application errors, frozen pointers, and blank screens.

FPD Problems

Details troubleshooting steps for Flat Panel Detector (FPD) calibration issues.

Power Failure

Explains system behavior and recovery after a power failure.

General Error Messages

Lists common error messages and their corresponding actions.

FPD Related Error Messages

Lists specific error messages related to the FPD.

X-ray Generator Console Messages

Lists messages and actions for the X-ray High Voltage Generator.

X-ray Tube Messages

Lists messages and actions concerning the X-ray Tube.

Power On Error Messages

Lists messages and actions for errors occurring during system startup.

Other System Messages

Lists other system messages and their resolutions.

C-arm Error Messages

Lists C-arm specific error messages and troubleshooting steps.

Switch Error Messages

Lists various other error messages and their actions.

Appendix

IVR NEO Buttons and Keyboard Shortcuts

Lists the functions assigned to IVR NEO buttons and keyboard shortcuts.

Shimadzu Bransist Alexa Specifications

General

Category	Medical Equipment
Manufacturer	Shimadzu
Model	Bransist Alexa
Dimensions	Varies by configuration
Weight	Varies by configuration
Technology	Digital radiography
Power Supply	AC power supply
Image Processing	Advanced image processing with real-time enhancement