Need help?Do you have a question about the Shimadzu MUX-100D and is the answer not in the manual?
General| Detector Size | 17 x 17 inches |
|---|---|
| Dynamic Range | 16-bit |
| Image Acquisition Time | <5 seconds |
| Power Requirements | AC 100-240V, 50/60Hz |
| Type | Portable Digital Radiography System |
| Detector Type | Flat Panel Detector (FPD) |
Provides general information about the system's description, operation, and specifications.
Details the system's design for delivering exceptional mobile X-ray performance and image quality.
Highlights features like smooth movement, compact design, easy positioning, and high throughput.
Specifies ambient temperature, humidity, pressure, and power supply requirements for operation.
Lists the IEC standards to which the system conforms for safety and performance.
Classifies the equipment by protection against electric shock and water ingress.
Explains the meaning and location of various safety symbols displayed on the system.
Shows the external appearance of the mobile X-ray system and identifies its parts.
Details the switches and displays on the X-ray control panel for system operation.
Describes the key switch, indicator lamps, emergency stop, and DR switch on the power supply panel.
Explains the functionality and operation of the color touch panel monitor.
Details the function of the exposure preparation and exposure switches on the hand switch.
Explains the operation of the handle used for moving the system and releasing the brake.
Describes the tube arm lock, small movement switch, measure, and collimator lamp controls.
Details how pressing the arm-lock release switch unlocks column rotation and arm movements.
Explains the machinery that holds the tube section and its lock release lever.
Describes the main circuit breaker's function and the additional protective electrical earthing wire.
Provides information on the CXDI-50G imaging unit and handling precautions.
Explains the slots for storing the imaging unit, grid, and cassettes.
Details the placement and usage of the apron hanger for X-ray protective aprons.
Describes the switch used to activate the emergency brake release function.
Explains the meaning of different colors and blinks of the operational state indicator lamp.
Details how to connect the LAN cable for outputting images to printers or workstations.
Provides tables detailing power on/off, DR system start/shutdown, and battery charge operations.
Instructions for turning the system on, off, and managing the DR system startup/shutdown.
Guidance on moving the system, including obstacle avoidance and travel modes.
Explains how to use the emergency stop switch to immediately halt system operations.
Details how to release the tube arm lock and set the tube arm position.
Covers setting exposure conditions manually and using anatomical programs.
Step-by-step guide on performing X-ray exposures, including preparation and archiving.
Instructions on how to charge the system's battery and indicators for charging status.
Details how to adjust settings like power-assist, acceleration, and buzzer controls.
Explains how to activate and use the emergency brake release function in critical situations.
Instructions for operating the system wirelessly using the infrared remote controller.
Details on using the protective screen to reduce radiation exposure and its placement.
Information on the optional grid frame that snaps onto the imaging unit.
Explains how to use the dose area meter to measure and display dose area product.
Covers daily and periodical checks for system components to ensure proper function.
Guidelines for cleaning the system surfaces with appropriate solutions.
Steps for performing the initial running-in operation (aging) for the X-ray tube.
Lists parts that are subject to wear and tear, including their part numbers and recommended replacement cycles.
Explains warning codes displayed on the mAs display that prevent X-ray exposure.
Details fault codes indicated by the fault lamp, which may affect system operation.
Refers to the CXDI Operator's Manual for faults occurring on the Acquisition System.
Illustrates the locations of various name plates and labels attached to the system.
States compliance with the Medical Device Directive 93/42EEC and provides representative contact information.
Provides technical specifications for use environment, common features, power supply, and high-voltage generator.
Presents schematic drawings with dimensions for the mobile X-ray system.
Illustrates the X-ray reference axis and focal spot position with diagrams and measurements.
Shows graphical representations of possible kV and mAs settings for X-ray exposures.
Details the dimensions, mass, and pixel specifications of the CXDI-50G imaging unit.
Provides specifications for the optional grid unit, including its dimensions and mass.
Table correlating anatomical codes with exposure mode keys and default kV/mAs settings.
To Next Page
