Chapter 4 How to Operate
Mobile DaRt Operation Manual
4-8
4.2.4 Stopping the DR System
Press the touch panel monitor’s DR shutdown button.
After the DR system’s shutdown processing is completed the DR system will
stop.
CAUTION
When the DR system is stopped, press the touch panel monitor’s DR
shutdown button.
While the DR system is operating, turning the key switch to OFF will not stop the
DR system. While the DR system is operating, even though the system is
stopped by the auto power off function, the DR system is not stopped.
CAUTION
When standing away from the system, be sure to stop the DR system.
Also, turn the key switch to the “OFF” position, remove the key, check that
the DR system is stopped and move away from the device.
NOTE
After use of the DR system is finished, be sure to stop the DR system. If the
system is left unused while the DR device is running, the battery will be
discharged.
NOTE
If the DR system does not respond when a button is pressed or the DR
system’s opeation is not normal, turn the key switch “OFF”, turn the main
breaker “OFF” and stop the DR system.
To Next Page
Loading...
Need help?
General
