4.9 User Setting
Mobile DaRt Operation Manual
4-37
4.9 User Setting
The power-assist, acceleration, steer control, backward power-assist
auto-power-off time, buzzer control, collimator lamp control, APR setting at the
time of starting the apparatus, and apparatus ID setting can be changed.
• The power-assist setting can adjust the operational feeling in driving the
system.
• The Acceleration setting can adjust the operational feeling in accelerating
the system.
• The steer control setting can adjust the operational feeling in stabilizing the
system.
• The backward power-assist setting can adjust the operational feeling in
back driving the system.
• The auto-power-off time setting can change the setting time of the
“Auto-power-off function”.
• The buzzer control setting can select beep the buzzer at x-ray control panel
switch operation.
Also, it is possible to choose whether or not to sound the additional buzzer.
• The collimator lamp control setting can enable or disable the “Setting the
Irradiation field” that is operated by the click-operation of the hand switch.
Also, it is possible to choose whether or not to “light the light field” after the
“Ready-up”.
• In APR setting at the time of starting the apparatus, it is possible to set the
exposure condition of the APR.
• In apparatus ID setting, it is possible to set each apparatus ID when two or
more apparatuses are used.
The methods of setting these items are described below.
To Next Page
Loading...
Need help?
General
