8
TO ENSURE SAFETY
•
To check the amount of looseness in the head parts, grasp the middle of the handlebar
and one of the front forks as shown in the illustration, and then move the head parts
back and forth in the directions indicated by the arrows.
Moreover, because the brakes give a small amount of gap if you apply the brakes fully
and shake the wheel as described above, this will make it more difficult to check the
looseness in the head parts.
•
Products are not guaranteed against natural wear and deterioration from normal use and aging.
•
For maximum performance we highly recommend Shimano lubricants and maintenance products.
The actual product may differ from the illustration because this manual is intended chiefly to explain the procedures for
using the product.
To Next Page
Loading...
