What does E010 mean on Shimano Bicycle Accessories and how to fix it?
If you encounter an E010 error with your Shimano Bicycle Accessories, press the battery power button to turn it on again. If the problem continues, contact the place of purchase.
Why does my Shimano Bicycle Accessories battery quickly lose its charge?
If the battery for your Shimano Bicycle Accessories quickly loses its charge, it might be nearing the end of its service life. Consider replacing it with a new one.
Why is my Shimano Bicycle Accessories assist traveling distance too short?
The assist traveling distance for your Shimano Bicycle Accessories may be shorter depending on road conditions, the gear position, and whether the lights are on or off. Check the battery charge and recharge it if it's low.
Why is pedaling stiff on my Shimano E6000?
If pedaling feels stiff on your Shimano Bicycle Accessories, check if the tires are inflated to a sufficient pressure and use a pump to add air. Also, ensure that the assist mode is not set to OFF; set it to HIGH. If the battery may be running low, charge the battery well, and then check the level of assistance again. Ensure that you turn on the power again without putting pressure on the pedal.
Why are my Shimano E6000 battery and charger becoming hot?
If your Shimano Bicycle Accessories battery and charger are getting hot, stop recharging and wait for a while before trying again. If the battery is too hot to touch, it may indicate a problem, and you should contact the place of purchase.
What to do if I get an E030 error on my Shimano E6000?
If you are getting an E030 error on your Shimano Bicycle Accessories, and the situation does not improve even after pressing the battery power button and turning on the power again, contact the place of purchase.
Why assistance is not being provided if the speed is too high on Shimano E6000 Bicycle Accessories?
Check the Cycle Computer display. Assistance is not provided at speeds of 25 km/h or more.
Why assist traveling distance is too short, because the battery characteristics will drop during winter weather on Shimano Bicycle Accessories?
This is not a sign of a problem.
What should I do if there's an abnormal odor from my Shimano E6000 battery?
If you detect an abnormal odor from your Shimano Bicycle Accessories battery, stop using the battery immediately.
What to do if Shimano E6000 Bicycle Accessories shows error W030?
If your Shimano Bicycle Accessories displays error code W030, change the assist switch to the gear shifting switch, or connect only one assist switch and turn on the power again. Also, check that the cable is properly connected between the drive unit and the motor unit.
Essential information and steps before using the bicycle for the first time.
Guidelines for safe operation, product use, battery care, and cleaning.
Step-by-step guides for charging various battery models.
Resolving common problems related to the power assist function.
Diagnosing and fixing problems with the battery and pedaling stiffness.
General| Battery Voltage | 36 V |
|---|---|
| Maximum Power Output | 250 W |
| Weight | 3.2 kg |
| Battery Compatibility | BT-E6000 |
| Series | E6000 |
| Display Compatibility | SC-E6000 |
To Next Page