Need help?Do you have a question about the Shimano STEPS E7000 SERIES and is the answer not in the manual?
General| Maximum Torque | 60 Nm |
|---|---|
| Rated Power | 250 W |
| WALK Mode | Yes |
| Nominal Voltage | 36 V |
| Series | E7000 |
| Category | Bicycle Accessories |
| Drive Unit | DU-E7000 |
| Assistance Modes | ECO, TRAIL, BOOST |
| Battery Options | BT-E8010 |
| Display | SC-E7000 |
| Switch | SW-E7000 |
| Maximum Assist Speed (km/h) | 25 km/h |
| Cadence Range (rpm) | 40-120 rpm |
| Walk Assist Power | Yes |
| Compatible Brake Type | Disc |
| Motor Type | Brushless |
| Connectivity | Bluetooth |
Essential safety advice for users to prevent injuries and ensure correct operation of the product.
Key safety precautions and warnings to prevent accidents and ensure safe riding.
Guidelines for safe handling, storage, and disposal of the battery to prevent hazards.
Safe usage practices for the product, including precautions for installation and environmental conditions.
Initial setup steps, including charging the battery and turning on the power.
Detailed instructions and safety precautions for charging the bicycle battery.
Step-by-step guide for securely installing and removing the battery from the bicycle mount.
Interpreting error codes and patterns displayed by the battery LED lamps.
List of warning codes displayed on the cycle computer and their remedies.
List of error codes displayed on the system and their corresponding remedies.
Troubleshooting common issues related to the assist function, causes, and solutions.
Common battery problems like charging failures, overheating, and reduced capacity, with solutions.
To Next Page
