23
Operation
Turning the power ON / OFF
•
The power cannot be turned on while charging.
•
If the bicycle has not moved for over 10 minutes, the power will automatically turn off (automatic power off function).
NOTE
Do not place your foot on the pedals when turning ON/OFF. This may cause a system error.
It is possible to forcibly power off BT-E8010/BT-E8020 by holding down the power button for 6 seconds.
1.
Press the power button on the battery. The LED lamps
will light up indicating remaining battery capacity.
NOTE
When turning on the power, check that the battery is firmly
attached to the battery mount.
<BT-E8010/BT-E8014>
Power button
<BT-E8020>
Power button
To Next Page
Loading...
