19
Installing / removing the battery
Installation of the battery
CAUTION
•
Hold the battery firmly and be careful to prevent dropping when installing. The battery may fall out while riding if not properly
locked in place.
•
Pay attention to the following to prevent the battery from falling while riding the bicycle.
-
Make sure the battery is locked securely on the battery mount.
-
Do not ride the bicycle with the key inserted.
NOTE
Before riding, make sure that the charging port cap is closed.
BT-E8010/BT-E8014
1.
Insert the battery from bottom side.
•
Align the indentation in the bottom of the battery
with the protrusion on the battery mount.
2.
Slide the battery.
•
Push in the battery until there is a click.
3.
Remove the key.
•
Return the key to the locked position and then
remove the key.
To Next Page
Loading...
