20
BT-E8020
This procedure is an example using a frame whose battery is removed/installed from below.
1.
Insert the battery from bottom side.
2.
Slide the battery.
•
Push in the battery until there is a click.
Removing
CAUTION
•
Hold the battery firmly and be careful to prevent dropping when removing or carrying it.
BT-E8010/BT-E8014
1.
Insert the Key.
Turn off the power, then insert the key into the key
cylinder in the battery mount.
Push power button to turn off the power.
Key
Key cylinder
2.
Turn the key until you feel some resistance.
To Next Page
Loading...
