Shinco SPS5-12C User Manual

Cooling mode

When the A/C enters cooling mode automatically or cooling mode is selected after
power ON, the cooling indicator lamp lights up.
 Press Up/Down key to adjust setting temperature (16℃~
~
30℃) .

Press Speed key to choose High/Mid/Low speed.
Fan mode

When pressing mode key or choosing Fan mode by pressing the remote controller,
the win d indicator lamp lights up.

Press Speed key to choose High/Mid/Low speed.

Temperature can’t be set.
Dehumidification mode

When pressing mode key or choosing dehumidification
mode by pressing the remote controller, the
dehumidification indic ator lamp lights up.

Remove the dehu midification water wedge, insert water
manifold, pl ace the other end of the water manifold into
the water vessel or drainage passage, as shown in the
right f igure.

(61℉ 86℉)
In dehumidification mode, the fan is defaulted to run at
low speed, and wind speed
can’t be adjusted.
 Temperature can’t be set.
OPERATION METHOD

Shinco SPS5-12C Specifications

General

Brand	Shinco
Model	SPS5-12C
Category	Air Conditioner
Language	English