EasyManuals Logo

Shinco YPLA-07C User Manual

Shinco YPLA-07C
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
EN
8
Put filter sieve in warm, neutral detergent (approx. 40) and leave to dry in a shady place
after cleaning.
SEASONAL CLEANING
If the air conditioner has not been used for a long time:
Remove the water wedge to drain the water.
Run the air conditioner for two hours in the aeration mode until the inside has
dried.
Switch off the air conditioner and unplug the power cord.
Wash and reinstall the filter screen.
Remove the exhaust pipe and store it properly.
Cover the air conditioner with a plastic bag and place in a dry place.
Common Failures and Diagnosis
Error-detecting code
Multi-functional defection
E1
Malfunction of the temperature sensor of the coil
E2
Malfunction of the internal temperature sensor
Frost protection: The temperature of the coil is too low and the
entire air conditioner is switched off. Once the temperature
Exceeds 8 , the protection is released and the previous
working condition is restored.
E4
Specification:
Voltage:250VAC
Current: 3.15A
Intelligent Error Detection
Fuse Parameters
mm

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shinco YPLA-07C and is the answer not in the manual?

Shinco YPLA-07C Specifications

General IconGeneral
BrandShinco
ModelYPLA-07C
CategoryAir Conditioner
LanguageEnglish

Related product manuals