Shindaiwa T262 User Manual (English)

Questions and Answers:

C
chadjenkinsJul 29, 2025
Why is my Shindaiwa Trimmer engine hard to start?
- T
  Tammy DavisJul 29, 2025
  If your Shindaiwa Trimmer engine is hard to start or doesn't start at all, several factors could be the cause. It might be due to a fuel strainer or fuel line obstruction, in which case you should clean or replace them, or a fuel mixture that's too rich, so you should open the choke, clean or replace the air filter, and adjust the carburetor. Also, make sure the stop switch is turned ON. A faulty spark plug could also be the culprit; adjust the gap to 0.65mm (0.026 in.) or clean/replace the plug. For carburetor issues, electrical problems or interlock switch, it's best to consult your dealer.
C
Charlene CordovaAug 7, 2025
How to fix Shindaiwa T262 Trimmer engine that does not accelerate properly?
- K
  Kelly SmithAug 7, 2025
  If your Shindaiwa Trimmer engine runs, but dies or does not accelerate properly, the spark plug might be dirty or worn, so you should clean and adjust or replace it. Improper adjustment may also be the cause, so you should adjust it. Check if the cooling system is dirty or plugged and clean it. Finally, a plugged spark arrestor screen may be the problem, so you should replace it.
M
Michelle EvansAug 17, 2025
What to do if Shindaiwa T262 Trimmer engine runs, but dies?
- C
  christina30Aug 18, 2025
  If your Shindaiwa Trimmer engine runs but dies or doesn't accelerate properly, the air filter might be dirty, so you should clean or replace it. Another possible cause is a dirty fuel filter, so you should replace the filter or the fuel. Also, the fuel vent might be plugged, so you should clean or replace it.

Shindaiwa T262 Specifications

General

Engine Displacement	25.4 cc
Engine Type	2-stroke
Shaft Type	Straight
Starter System	Recoil
Fuel Capacity	0.42 liters
Cutting Swath	457 mm
Shaft Length	1.8 m
Fuel Tank Capacity	0.42 liters
Cutting Width	20 inches

Summary

Introduction

Servicing Information

Parts and Serial Number Identification

Locating model and serial numbers for parts identification and service.

Service and Warranty

Information on authorized service dealers, warranty repairs, and proof of purchase.

Consumer Product Support

Contacting support for assistance with application, operation, or maintenance.

Product Registration

Registering the product online or via mail for warranty coverage and updates.

Safety Guidelines

Manual Safety Symbols and Information

Explanation of safety alert symbols and keywords used in the manual.

International Safety Symbols

Visual identification and meaning of common safety symbols used on the equipment.

Personal Condition and Safety Equipment

Guidance on physical condition and required personal protective equipment (PPE).

Proper Clothing Guidelines

Specifications for safe and snug-fitting durable clothing.

Pacemaker and Electromagnetic Field Warning

Extended Operation and Extreme Conditions

Repetitive Stress Injuries (RSI) Prevention

Information on preventing RSI and Carpal Tunnel Syndrome (CTS) through proper technique.

Operational Safety Guidelines

Electrical and Ventilation Hazards

Warnings about electrical conductors and operating in poorly ventilated areas.

Work Area and Operator Stance

Ensuring a clear work area, firm grip, and solid stance for safe operation.

Fuel System Leak Warning

Emission Control Information

CARB and EPA Emissions Control

Information on emission control system types and their compliance with regulations.

Product Emission Durability Period

Explanation of the emission compliance period and its relation to maintenance.

Product Description and Decals

Assembly Instructions

Support Handle Assembly

Instructions for positioning and tightening the support handle for comfortable operation.

Line Installation (HDFH Models)

Method for installing trimmer line on HDFH models.

Operating the Grass Trimmer

Fuel Handling and Specifications

Comprehensive guide to fuel types, oil standards, safe handling, and mixing procedures.

Starting and Stopping Engine

Starting a Cold Engine

Step-by-step procedure for starting the engine when cold, including choke and purge bulb usage.

Starting a Warm Engine

Procedure for starting the engine when it is already warm, with safety warnings.

Stopping the Engine

Instructions for safely stopping the engine using the stop switch.

Maintenance Overview and Skill Levels

Maintenance Skill Levels

Explanation of skill levels (1 and 2) assigned to maintenance tasks.

Maintenance Intervals and Procedures

Table outlining maintenance tasks, intervals, and required skill levels for components.

Engine Component Maintenance

Air and Fuel Filter Maintenance

Procedures for cleaning the air filter and replacing the fuel filter.

Spark Plug and Cooling System Care

Instructions for spark plug maintenance and cleaning cooling system fins.

Exhaust System Maintenance

Spark Arrestor Screen Cleaning

Detailed steps for removing, cleaning, and replacing the spark arrestor screen.

Exhaust Port Cleaning

Procedure for cleaning carbon deposits from the cylinder exhaust port.

Carburetor and Lubrication

Carburetor Adjustment

Guidance on adjusting the carburetor for idle speed and high altitude operation.

Gear Case Lubrication

Steps for checking and adding grease to the gear case, with a notice about ungreased cases.

Drive Shaft and Line Head Maintenance

Drive Shaft Lubrication

Procedure for lubricating the flexible drive shaft cable.

Nylon Line Head Disassembly

Instructions for disassembling the Speed Feed head if necessary.

Nylon Line Replacement

Step-by-step instructions for cutting and installing new trimmer line.

Troubleshooting Engine Problems

Storage and Long-Term Preservation

Long Term Storage Procedure

Detailed steps for preparing the unit for storage to prevent damage.

Product Specifications

Product Registration Information

Related product manuals