Shindaiwa T262X User Manual

X7502341601
© 10/19 ECHO Incorporated
Operator’s
Manual
T262X
GRASS TRIMMER
/ BRUSH CUTTER
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Read and understand all provided literature before use.
Failure to do so could result in serious injury.
Note: This product complies with CAN ICES-2/NMB-2.

Shindaiwa T262X Specifications

General

Engine Type	2-Stroke
Displacement	25.4 cc
Weight	5.6 kg
Shaft Type	Straight
Handle Type	Loop Handle
Cutting Width	43 cm
Drive Type	Flexible drive shaft
Cutting Attachment	Trimmer Head

Summary

Introduction

Servicing Information

Parts and Serial Number

Location and importance of model and serial numbers for parts.

Service, Support, and Registration

Details on warranty service, customer support, and product registration.

Safety

Safety Symbols and Definitions

Explanation of safety alert symbols, keywords, and general warning icons.

International Safety Symbols

Explanation of various international symbols used on equipment and manual.

Operator and Bystander Safety

Covers safety distances, thrown objects, and fuel safety.

Personal Safety Equipment and Condition

Addresses operator's physical state and required safety gear.

Protective Gear, Clothing, and Health Risks

Details gear, clothing, RSI, vibration, cold, and pacemaker risks.

Safe Operation Practices and Equipment Checks

Covers safe operating practices, vibration, RSI, electrical hazards, and unit integrity.

Electrical Hazards and RSI Prevention

Discusses RSI/CTS prevention and electrical conductor warnings.

Safe Operation and Hazard Avoidance

Covers ventilation, work area clearing, grip, stance, and hot surfaces.

Equipment Safety and Fuel System Integrity

Focuses on approved attachments, unit integrity, and fuel system leaks.

Wiring Safety and Fuel System Checks

Details safe wiring practices and fuel system leak checks.

Emission Control

CARB and EPA Emissions Information

Explains emission control systems and compliance periods.

Product Description

Safety Decals and Component Identification

Locating safety decals and identifying all parts of the unit.

Contents and Assembly

Package Contents

Lists all items included in the product packaging for assembly check.

Assembly Procedures

Step-by-step guides for assembling handles, shields, blades, and line heads.

Operation

Operation Warnings and Fuel Requirements

Crucial safety warnings for operation and detailed fuel requirements.

Fuel Mixing and Handling

Guidelines for safely mixing and handling fuel and oil.

Starting, Stopping, and Line Advance

Step-by-step guides for engine start/stop and advancing trimmer line.

Blade Operation and Techniques

Guidance on blade use, selection, operation, and cutting techniques.

Operating Techniques and Reaction Forces

Best practices for operation, trimming, scything, and understanding reaction forces.

Cutting Problems and Maintenance Introduction

Addresses binding, kickout, and introduces maintenance.

Maintenance

Skill Levels and Maintenance Schedule

Classifies tasks by skill level and outlines maintenance intervals.

Lubrication and Line Head Maintenance

Instructions for lubricating components and replacing trimmer line.

Troubleshooting

Engine Starting and Running Issues

Diagnoses and remedies for engine starting and running problems.

Engine Cranking and Performance Issues

Solutions for engine not cranking or accelerating properly.

Storage

Long Term Storage Procedures

Steps for preparing the unit for extended storage.

Specifications

Technical Specifications

Detailed technical data for the T262X model.

Model Settings and Registration

Lists operational speeds and provides product registration details.

Notes