To Next PageTo Next Page
Need help?Do you have a question about the Shindaiwa T261 and is the answer not in the manual?
Explains the meaning of Warning, Caution, Important, and Note statements in the manual.
Guidelines for operator alertness, fitness, and avoiding impairment.
Safety precautions to prevent fires during operation and refueling.
Best practices for safe handling, balance, and environment awareness.
Ensuring bystander safety and awareness of thrown debris.
Maintaining readability and presence of safety labels.
Familiarization with the unit's various components.
Detailed technical data including weight, engine, and dimensions.
Steps for attaching and positioning the operator handle.
Procedure to set the correct throttle lever free play.
Step-by-step guide for shield installation.
How to adjust the line cutter for optimal cutting length.
Instructions for securely attaching the trimmer head.
Detailed instructions for attaching a cutting blade.
Proper fuel-oil ratios and warnings about fuel types.
Safety measures for refueling the unit.
Understanding the ignition switch positions.
Correct method for using the primer bulb.
Actions to take after the engine starts, including choke and warm-up.
Critical safety warnings during engine starting.
Steps to take if the engine becomes flooded.
Steps to adjust the engine idle speed for proper clutch disengagement.
Warning against rotating cutting attachment at idle.
Checks for proper installation, damage, and component integrity.
Proper adjustment and use of the shoulder strap.
Safety advice specific to operating the T261X with a blade.
General advice and types of trimmer heads.
Warnings about line tangling, shield use, and low RPM operation.
Methods for efficient grass trimming and edging.
Safety checks and warnings before operating with a blade.
Understanding blade thrust and the role of the handlebar.
Using shoulder straps and optimal engine speeds with blades.
Safe cutting zones, wood cutting, and unapproved blade warnings.
Information on maintaining emission control components.
Essential safety actions before any maintenance.
Maintenance for muffler, spark plug, fasteners, and daily/10-hour checks.
Care for blades, including sharpening, replacement, and usage warnings.
Instructions for air cleaner care and associated warnings.
Spark plug cleaning and gap adjustment every 10-15 hours.
Lubricating gearcase and replacing fuel filter every 50 hours.
Cleaning the muffler assembly every 135 hours.
Preparing the unit for storage to prevent damage.
How to sharpen different types of cutting blades.
Critical safety warning about altering blade contour.
Steps to diagnose and resolve low engine power.
Troubleshooting for issues like poor acceleration and vibration.
Details on manufacturer's and owner's warranty duties.
Warranty periods for different uses and specific exclusions.
Key information and warnings for engine product owners.
Conditions and actions that void the product warranty.
Details on emission warranty coverage and owner responsibilities.
List of emission parts covered and not covered by warranty.
Information on parts availability and service requirements.
Contact details for product support and manual acquisition.
Explains the meaning of Warning, Caution, Important, and Note statements in the manual.
Guidelines for operator alertness, fitness, and avoiding impairment.
Safety precautions to prevent fires during operation and refueling.
Best practices for safe handling, balance, and environment awareness.
Ensuring bystander safety and awareness of thrown debris.
Maintaining readability and presence of safety labels.
Familiarization with the unit's various components.
Detailed technical data including weight, engine, and dimensions.
Steps for attaching and positioning the operator handle.
Procedure to set the correct throttle lever free play.
Step-by-step guide for shield installation.
How to adjust the line cutter for optimal cutting length.
Instructions for securely attaching the trimmer head.
Detailed instructions for attaching a cutting blade.
Proper fuel-oil ratios and warnings about fuel types.
Safety measures for refueling the unit.
Understanding the ignition switch positions.
Correct method for using the primer bulb.
Actions to take after the engine starts, including choke and warm-up.
Critical safety warnings during engine starting.
Steps to take if the engine becomes flooded.
Steps to adjust the engine idle speed for proper clutch disengagement.
Warning against rotating cutting attachment at idle.
Checks for proper installation, damage, and component integrity.
Proper adjustment and use of the shoulder strap.
Safety advice specific to operating the T261X with a blade.
General advice and types of trimmer heads.
Warnings about line tangling, shield use, and low RPM operation.
Methods for efficient grass trimming and edging.
Safety checks and warnings before operating with a blade.
Understanding blade thrust and the role of the handlebar.
Using shoulder straps and optimal engine speeds with blades.
Safe cutting zones, wood cutting, and unapproved blade warnings.
Information on maintaining emission control components.
Essential safety actions before any maintenance.
Maintenance for muffler, spark plug, fasteners, and daily/10-hour checks.
Care for blades, including sharpening, replacement, and usage warnings.
Instructions for air cleaner care and associated warnings.
Spark plug cleaning and gap adjustment every 10-15 hours.
Lubricating gearcase and replacing fuel filter every 50 hours.
Cleaning the muffler assembly every 135 hours.
Preparing the unit for storage to prevent damage.
How to sharpen different types of cutting blades.
Critical safety warning about altering blade contour.
Steps to diagnose and resolve low engine power.
Troubleshooting for issues like poor acceleration and vibration.
Details on manufacturer's and owner's warranty duties.
Warranty periods for different uses and specific exclusions.
Key information and warnings for engine product owners.
Conditions and actions that void the product warranty.
Details on emission warranty coverage and owner responsibilities.
List of emission parts covered and not covered by warranty.
Information on parts availability and service requirements.
Contact details for product support and manual acquisition.
General| Engine Type | 2-Stroke |
|---|---|
| Displacement | 25.4 cc |
| Shaft Type | Straight |
| Starter System | Recoil |
| Type | Trimmer |
