Need help?Do you have a question about the Shini SHD Series and is the answer not in the manual?
Mounts the hopper dryer directly onto the molding machine using a standard base.
Mounts the dryer on a floor stand, conveying material via a photo-sensor hopper receiver.
Details important safety signs and labels on the machine, including warnings.
Instructions for safely connecting the power source to the control box.
Procedure for testing the dryer after power connection, checking blower rotation.
Overview of the SHD dryer's control panel components and layout.
Basic steps to turn on the blower and heater switches for operation.
Guide on how to set the desired drying temperature using the controller.
Steps for operating the control panel with timer: blower, heater, and timer.
Detailed instructions for setting the timer for drying operations.
Table listing common faults, their causes, and solutions for dryer issues.
Table detailing the technical specifications for different SHD models.
Table showing drying capacity for various materials and SHD models.
Table detailing power, wire diameter, and current ratings for 400V models.
Schematics of the main electrical circuits for SHD models at 400V.
Schematics of the control circuits for SHD models at 400V.
Diagrams of component layout and terminal connections for SHD models.
Schematics of the main electrical circuits for SHD models at 230V.
Schematics of the control circuits for SHD models at 230V.
To Next Page
General
