Need help?Do you have a question about the Shini SHD-25 and is the answer not in the manual?
General| Hopper Capacity | 25 kg |
|---|---|
| Voltage | 380V |
| Heating System | Electric |
| Drum Material | Stainless Steel |
| Timer | Yes |
Mounting the hopper dryer directly onto the molding machine via a standard base.
Mounting the dryer on a floor stand and conveying material to the molding machine.
General safety rules, including electrical installation and safety signs.
Specifies the power requirements for the SHD series dryer.
Instructions for connecting power and initial testing of the dryer.
Steps for operating the basic control panel switches.
Guide on how to set the desired drying temperature using the controller.
Details the control panel for dryers equipped with a timer function.
Instructions on how to set the timer for drying operations.
Installation of optional dust collectors and filters for the air exhaust.
Instructions for installing the suction box for material conveyance.
Details the installation of the AIF filter for the blower's air intake.
Explains how to install a hot air recycler for energy saving.
Procedures for maintaining and repairing the dryer and its components.
Common faults, their causes, and solutions for the hopper dryer.
Diagrams showing the external dimensions of various SHD models.
Table detailing technical specifications for different SHD models.
Exploded views showing the assembly of various SHD models.
Detailed lists of spare parts for different SHD model series.
Table listing power, wire diameter, and current ratings for 400V models.
Main electrical circuit diagrams for SHD models at 400V.
Control circuit diagrams for SHD models at 400V.
Component layout and terminal wiring diagrams for SHD models at 400V.
Detailed bills of electrical parts for SHD models at 400V.
Table listing power, diameter, and current ratings for 230V models.
Main electrical circuit diagrams for SHD models at 230V.
Control circuit diagrams for SHD models at 230V.
Component layout and electrical diagrams for SHD models at 230V.
Detailed bills of electrical parts for SHD models at 230V.
To Next Page
