Unpacking and Introduction
What’s in the Box
FabCure 2
Turntable
Power Cable
Quick Start Guide
Product Overview
The Fabcure 2 is protected by above and around the machine. During unpacking, foam inserts
inspect the Fabcure 2 for any damages or missing items.
Note: Remove all packaging material before connecting power.
Chamber door insulates the cure chamber
and internal UV light.
Turntable rotates to ensure balanced curing
for all surfaces.
Knob is integrated into an OLED screen enabling an interactive and convenient
operation experience.
LEDs emit powerful UV light from the sides and bottom.
Lamp is designed to automatically turn on when the chamber door is opened.
Heating module precisely controls ambient temperature to 60°C.
01
Pos t-cur ing Uni t
Post-curing Unit
To Next Page
Loading...