Figure 1. Model D4666.
A
C
B
COPYRIGHT © APRIL, 2017 BY WOODSTOCK INTERNATIONAL, INC. REVISED NOVEMBER, 2017 (HE)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China#18887JH
Model D4666
HEAVY-DUTY MOBILE BASE
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
Operating machinery on an unsecured
mobile base may allow the machine
to shift unexpectedly, which could
result in accidental contact with the
cutting device or other moving parts.
Inventory (Figure 1)
A. Right Front Corner Bracket ..............................1
B. Left Front Corner Bracket................................1
C. Right Rear Corner Bracket ...............................1
D. Left Rear Corner Bracket .................................1
E. 21" Side Rails ...............................................4
F. 3" Swivel Casters ..........................................2
G. 3" Wheels ...................................................2
H. Foot Pedals .................................................4
I. Foot Pedal Springs .........................................2
J. Foot Pedal Plungers .......................................2
K. Adjustable Rubber Feet ..................................2
L. Bearing Sleeves ............................................4
M. Shoulder Bolts M10-1.5 x 55 (Casters) .................2
N. Shoulder Bolts M8-1.25 x 52 (Pedals) ..................2
O. Hardware (Not Shown)
—Hex Bolts M8-1.25 x 16 (Brackets) .................. 24
—Hex Nuts M10-1.5 (Rubber Feet) ......................2
—Lock Nuts M8-1.25 (Caster/Pedal) .................. 10
—Lock Nuts M10-1.5 (Casters) ...........................2
Specifications
• Minimum Inside Dimensions .................... 19" x 21"
• Maximum Inside Dimensions ............. 29
1
⁄2" x 29
1
⁄2"
• Maximum Weight Capacity ...................... 1200 lbs
Items Needed for Assembly
• Open-End Wrench or Socket 13mm .....................1
• Open-End Wrench or Socket 14mm .....................1
• Open-End Wrench or Socket 17mm .....................1
• Measuring Tape.............................................1
D
E
F
G
H
I
Introduction
Your new Model D4666 Heavy-Duty Mobile Base is
designed to give you a stable and mobile platform upon
which to mount machinery and equipment.
J
K
L
M
N
To Next Page
Need help?
General