What to do if 9 bars flash on my Shoprider STREAMER 888WB Wheelchair?
If the 9 bars are flashing on your Shoprider Wheelchair, it indicates a solenoid brake fault. You should check the free wheel levers.
Why are 10 bars flashing on my Shoprider Wheelchair?
If the 10 bars are flashing on your Shoprider Wheelchair, it means the battery voltage is too high. In this case, check the battery connections.
General| Drive System | Rear-Wheel Drive |
|---|---|
| Tire Type | Pneumatic |
| Frame Material | Steel |
| Seat Width | 18 inches (46 cm) |
| Battery | 12V 35Ah (x2) |
| Front Tire Size | 8 inches (20 cm) |
| Color Options | Red, Blue |
Details the specific components and features of the WIZZ 888WNL powerchair model.
Details the specific components and features of the STREAMER 888WB/888WSB models.
Details the specific components and features of the STREAMER 888WAB powerchair model.
Details the specific components and features of the JETSTREAM-M 888WAM powerchair model.
Details the specific components and features of the JETSTREAM-L 888WAL powerchair model.
Explains how powerchairs can be susceptible to EMI from radio sources.
Details EM energy concerns and warnings to prevent interference with the control system.
Lists specific warnings and precautions to prevent EMI interference with the powerchair.
Highlights critical safety points like reading the manual, weight limits, safety belt use, and charging.
Details the proper procedure for replacing loosened wheel assembly bolts with specific torque.
Advises on adjusting seat position for inclines to ensure user safety and balance.
Locates warning labels and pinch points on the joystick controller for user awareness.
Shows warning labels and charge indicators on the WIZZ 888WNL chassis shroud.
Shows warning labels and charge indicators on the STREAMER 888WAB chassis shroud.
Displays warning labels and operational notes for STREAMER 888WB/888WSB chassis.
Identifies warning labels, notes, and indicator lights for JETSTREAM-L/M chassis.
Explains how to adjust the length, angle, height, and width of footrests and armrests.
Covers fitting the joystick controller and adjusting seat supporting posts and backrest.
Provides step-by-step instructions for safely mounting curbs using the Curb Skipper device.
Instructs on connecting batteries, initial charging duration, and achieving maximum efficiency.
Differentiates between powerchair models with programmable and non-programmable controllers.
Details length and angle adjustments for footrests on STREAMER and WIZZ models.
Explains angle, length, height, and width adjustments for armrests on STREAMER/WIZZ.
Details length and angle adjustments for footrests on JETSTREAM-L/M models.
Explains angle, length, height, and width adjustments for armrests on JETSTREAM models.
Describes how to convert the joystick controller from the right side to the left side.
Explains the methods for adjusting seat height on WIZZ, STREAMER, and JETSTREAM models.
Details the correct procedure for installing and setting up the safety belt and fastening straps.
Introduces the VSI 50 joystick controller, its display, and basic functions.
Explains the function of the On/Off button, speed adjustment buttons, and horn button.
Details how to use the joystick to control the speed and direction of the powerchair.
Details the charging port for off-board chargers and important usage notes.
Provides step-by-step instructions for preparing and starting to drive the powerchair.
Explains how to switch between engaged and disengaged modes for brake control.
Lists the major components for the WIZZ 888WNL powerchair model.
Lists the major components for the STREAMER 888WB, 888WAB, and 888WSB models.
Lists the major components for the JETSTREAM-L/M 888WAL and 888WAM models.
Provides detailed step-by-step instructions for safely dismantling the powerchair.
Describes battery type, location, duration factors, and battery gauge interpretation.
Details battery charging procedures for powerchair models equipped with an on-board charger.
Provides step-by-step instructions for charging the powerchair using the on-board charger.
Details battery charging procedures for powerchairs equipped with an off-board charger.
Provides charging instructions for JETSTREAM models with on-board chargers.
Explains how to diagnose faults using the battery gauge's flashing codes.
Explains how to lock and unlock the powerchair controller to prevent unauthorized use.
Describes the automatic sleep mode for the controller and how to reset it.
Contains a comparative table of specifications including dimensions, weight, speed, and range.
Provides a template for recording maintenance and service history for the powerchair.
To Next Page
