Step 4: During Play
PinCollect
PinCollect is a simple feature that
allows you to get the most out of your
statistics by collecting the position of
the pin. When you reach a green, your
watch will automatically change to the
PinCollect screen. This screen shows
the numbers 1-3, which represent the
number of putts taken on the hole.
On the following screen a 0 or 4 putt
can be recorded. Once you have holed
out, stand over the hole and press
the button next to the number which
correlates with the amount of putts
taken. This will save the pin location
for that hole.
13
How to record a penalty on course?
Navigate to the penalties screen by pressing the top left
menu button. The rst option is ‘Penalties’, press the top
right button to conrm the selection. You can then cycle
through the different penalty options and select the one that
is relevant to you. There is more information about using
penalties on the support site:
https://shotscope.com/uk/support
What if I forget to PinCollect?
Although the watch will remind you to do so on every green,
forgetting is still easily done! If you do forget, you can add the
pin position in editing and move your putts as required. There will
be more on the editing feature later.
Scrolling between holes
When you nish a hole, the watch
will automatically change to the next
hole. If you need to manually change
the hole the watch is on you can do
this by pressing the bottom right
button to go forward and the bottom
left button to go back.
To Next Page
Loading...
Need help?
General
