Shott SF38 - Page 9

E N
Nome file:
File name:
7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017
9-28
4 Technical specifications and features.
See Tab. 2.
The hydraulic parts used for the building of the system which shall include the product modify the
performance (head and flowrate) of the pump.
SF15
PPF15
SF25
PPF25
SF30
PPF30
SF38
PPF38
SF45
PPF45
SF60
PPF60
SF65
PPF65
SF85
PPF85
SF200
PPF200
15 25 30 38 45 60 65 85 200
[mm] 389 380 500 520 430 599 530 650 780
[mm] 252 334 306 334 396 396 476 476 646
[m
2
] 0.04 0.07 0.07 0.07 0.12 0.12 0.17 0.17 0.36
Ø
[mm]
0.4 – 0.8
13-17 18-25 20-25 20-25 25-30 40-50 50-60 75-80 150-160
EN 12904 (Type 2)
TBR
4
93% 90% 87% 90% 81% 90% 68% 92% 87%
dp20
5
[g] 58 58 91 93 89 93 75 225 235
[m³] <20 20-30 20-35 25-45 35-45 45-55 45-55 60-70 80-100
[l/h] 4000 4000 5500 4000 6000 6000 8500 12000 18000
[m
3
/h] 4 4 5.5 4 6 6 8.5 12 18
[l/min] 66.7 66.7 91.7 66.7 100 100 141.7 200 300
MOP
[m] 10 10 20 10 20 20 20 20 20
[bar] 1 1 2 1 2 2 2 2 2
[kPa] 100 100 200 100 200 200 200 200 200
filter
[m] 2 - 4 2 - 4 5 - 8 5 - 6 5 - 8 5 - 8 6 - 8 8 - 10 7 - 10
[bar] 0.2-0.4 0.2-0.4 0.5-0.8 0.5-0.6 0.5-0.8 0.5-0.8 0.6-0.8 0.8-1.0 0.7-1.0
back
wash
[m] 4 - 5 4 - 5 8 - 10 7 - 11 8 - 10 8 - 12 8 - 12 10 - 13 11 - 15
[bar] 0.4-0.5 0.4-0.5 0.8-1.0 0.7-1.10 0.8-1.0 0.8-1.2 0.8-1.2 1.0-1.3 1.1-1.5
IN/OUT
Tab. 2
4
Turbidity reduction efficiency
5
Retained mass
32 O
38 O
38 O
38 O