Cushion Support
Your Pediatric chair comes with a
unique cushion support that can be
used for a range of purposes.
1, It can be used to support the head
with its curved sides offering sideways
stability.
2. It can be used to provide neck
support should this be needed for
certain users.
3. It can also be used as a lower back
lumbar support to help sitting up
correctly.
8
P1 & P2 Pediatric Conversion Kit
We’ve design this system to be simple
and fast so that changes can be made
swiftly with minimal distruption to the
user.
Simply pull your support cusion (part
#500-179 P2 and part #500-178 P1) out
from the back rest cusion and position
it where required the selection of holes
provided.
Note: This support is optional and may not
suit all users. remove if not required.
These adjustments are best carried out
by adjusting the top or bottom individu-
ally while the other is still located, this
then acts as a pivot for the seat
backrest and makes alignment of holes
easier. Ensure all seat lock knobs are
tightened before use.
To Next Page
Loading...