Footrest / Height
Adjustment / Fold Away
The tray style footrests fitted to your chair
are not designed to carry user weight. They
are designed for a user to rest their feet.
WARNING - DO NOT STAND on the footrest
as the chair may become unstable and tip
forward causing injury to the user.
To raise or lower the footrests unscrew the
locking knob in the footrest supports (parts
#500-253 and part #500-254) and move the
footrest supports up or down to suit the user
height requirement.
Should the user be very tall and require
additional seat cushion to footrest adjust-
ment, raise the seat height (as detailed
earlier) while having the footrest support at
the lowest setting.
The footrests can be folded and swung away
when not in use or during transfers.
1. Lift the footrest plate and fold it up until
required to be lowered again.
2. Lift footrest assembly and rotate to swing
the entire leg out and away should more
room be required.
To remove completely simply lift away from
the main seat assembly.
13 SB6 Roll-in Shower Chair
1
2
To Next Page
Loading...