Seat Cushion
The seat cushion can be removed for
cleaning or to change from open front to one
of the accessory options with open side or
closed front by releasing the seat fixing
knobs (part #500-079) underneath the seat
cushion.
Commode Bucket and
Commode Deflector
Connectors (part #500-095) hold the
commode bucket (part #500-072) to the chair
and are factory- fitted to the underside of the
cushion. Slide the commode bucket in from
the rear of the chair and locate the bucket
into the slide / connectors. Push the bucket in
until it stops against the connector end.
15 SB6 Roll-in Shower Chair
To Next Page
Loading...