1
HINTS & TIPS
● Surfaces to be siliconed should be de-greased in
accordance with silicone suppliers instructions, observing
any safety instructions.
● Ensure there are no hidden pipes or cables in the wall
before drilling.
● If using power tools (e.g. to drill holes) wear safety
glasses and always disconnect tools from the power
supply after use.
● If drilling holes in ceramic tiles use a piece of masking
tape on the tile to stop the drill bit from slipping.
● DO NOT use your drill on hammer action when drilling
holes in ceramic tiles.
● Use the opened out enclosure packaging to protect your
floor and wall while assembling.
CARE & MAINTENANCE
● To prevent the formation of water spots on the glass, use
the squeegee supplied in the installation fixing pack to
wipe down the glass after every shower.
● Always use plenty of water and a soft cloth or sponge to
wipe down all aluminium sections and plastic parts.
● Do not use any solvent or abrasive chemicals to clean
this product.
● We recommend that this product is cleaned with
Showerlux ‘Showerclean’ once a week. This will help to
reduce the build up of lime scale.
● Showerlux enclosures and screens are generally
maintenance free. However, it may be necessary to
lubricate roller assemblies or other moving hinge parts
occasionally. Use a high quality silicone spray on the
moving parts as required.
Issue 1 - 07/11
To Next Page
Loading...