SHOWTEC Lampy 40 - Locking the Console; Shutting down or Rebooting the Console

204
Showtec LAMPY Series
Product: 50740 / 50741 / 50742 / 50743
8.11. Locking the Console
You may lock the console to prevent unauthorized access by clicking on the Menu button and clicking
on the Lock button.
The default Pin Code is “0000”, but the PIN may be changed from within the Setup Menu.
Fig. 208: Side Menu – Lock Console
8.12. Shutting down or Rebooting the Console
You may close the show, shut down or reboot the console by clicking on the Menu button and then on
the Power button.
Fig. 209: Side Menu – Reboot / Shutdown Console