Need help?Do you have a question about the SHOWTEC Lite-8 Pro and is the answer not in the manual?
Power| power input | DC9~15V, 500mA |
|---|---|
| internal fuse | 500mA 250V, 5x20mm |
Ports & interfaces| MIDI IN | 5Pin MIDI connector |
|---|---|
| DMX OUT | 5Pin/3Pin(female) DMX connector |
| SOUND INPUT | RCA connector |
| EXT STEP CONTROL | DB-9 connector |
Weight and Dimensions| dimensions | 483x135x82 mm |
|---|---|
| weight | 2.2 kg |
Safety guidelines and important precautions for using the lighting controller unit.
Handling advice and immediate actions for product damage or issues.
Information regarding potential changes to product specifications and manual content.
Detailed description of the Lite-8 Pro control panel layout and its various buttons and faders.
Identifies and explains the connectors and ports located on the rear of the lighting controller.
Instructions on how to enter, edit, and save programmed scenes or chases with up to 99 steps.
Procedure for removing programmed scenes or chases from the lighting controller's memory.
Steps to review the content and sequence of pre-programmed scenes or chases.
Guide to restoring the factory default settings for the 18 original preset chases.
How to customize or reset the 'FULL ON' function for immediate full dimming of channels.
Instructions for customizing or resetting the 'STAND-BY' function to stop all channel outputs.
Restores the original factory preset 'STAND-BY' function for immediate output shutdown.
Procedure to select and save the desired MIDI channel for controlling the lighting unit.
Explanation of different modes (ONE, MIX, SEQ) for running programmed scenes or chases.
Details on Manual, Auto, and Audio triggering methods for chase sequences.
Enabling or disabling fade time for chase steps, linked to speed settings.
Guidelines for cleaning and general upkeep of the lighting controller unit.
Common issues and their solutions for the lighting control console.
To Next Page