SHOWTEC Lampy 40 - The External Screen

29
Showtec LAMPY Series
Product: 50740 / 50741 / 50742 / 50743
7.2. External Screen
The LAMPY supports one external monitor that may be connected to the DVI Port on the back of the
console. Since Lampy 2.0.0, any screen resolution is supported, however a Full HD resolution of 1920 x
1080 is recommended. The LAMPY also supports external screens with touch functionality.
The LAMPY DNGL unlocks more functions in the external screen. Keep in mind that the dongle is already
included in the 2 Universe Versions of the console.
7.2.1. External Screen functionality without the LAMPY DNGL
Without the dongle, the external screen always shows the Fixtures View and the Magic Sheet View. Zoom
and viewport may be chosen differently than from the internal view.
On the bottom of the screen, you will see fader labels for the Multi-Function Faders, as well as the Fader
Mode of these.
Fig. 19: External Monitor – Fixtures View - No LAMPY DNGL attached
Fig. 20: External Monitor – Magic Sheet View - No LAMPY DNGL attached