Menu Functions Explained
DMX Address selection
Reset unit, the display will show for 30 seconds
Working Speed selection Maximum working speed
80% of the working speed
Channel selection 16-bit available for Pan (X) and Tilt (Y)
16-bit not available for Pan (X) and Tilt (Y)
Channel Test selection. First select the channel, then press enter to test the desired channel
Time Menu LED lifetime, hold enter for 5 seconds to reset time to 0
Unit working hours
Display open
Display main Menu
Display close after 10 seconds
Display inverse
Display normal
Tilt (Y) direction selection Tilt in positive direction
Tilt in negative direction
Pan (Y) direction selection Pan in positive direction
Pan in negative direction
To Next Page
Loading...