Product Specification
Model: Showtec LED Orbit I
Voltage: 230V-50Hz (CE)
Power Select 110V/220V
Fuse: Fuse ø5 X 20 6A / 250V
Dimensions: 359x300x365mm (LxWxH)
Weight: 7,68 kg
Operation and Programming
Signal pin OUT : pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing : LED control panel
Pan / Tilt 8 or 16 bit
DMX channels: 10
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Control: Automatic and DMX remote ON / OFF
Electro-mechanical effects
Dimmer : 0 – 100% linear dimmer
Strobe-effect with variable speed (1 flash -- 10 flashes/sec.)
DMX-control via standard DMX-controller
Pan 0º -- 540º
Tilt 0º -- 270º
Wheel control : auto-electronic reset
Cooling: Fan cooled
Design and product specifications are subject to change without prior notice.
Website: www.Highlite.nl
Email: service@highlite.nl
To Next Page
Loading...