5.0 Physical Interface
:21
5.1
J1/P1
Connector
:21
5.2 J5/P5 Connector
:22
5.3 J4/P4 Connector
:22
6.0 Drive Physical Specifications
:23
6.1
Drive Dimensions
:23
6.2 Mounting Recommendations
:23
6.2
..
1 Vertical Mounting
:23
6.2,,3
Upright Mounting " '
:23
6.3 Chassis Slide
:25
6.4 Decorative Face Plate
:25
7.0 Customerlnstallable Options
:27
7.1
0 rive Select - One to Eight Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
:30
7.2 Select Drive Without Loading Head or Enabling Stepper Motor
:31
7.3 Select Drive and Enable Stepper Without L.oading Head
:32
7.4 Load Head Without Selecting Drive or Enabling Stepper
:32
7.5 Radial Ready ' 33
7.6 Radiallndex/Sector 34
7.7 Eight, 16, Or 32 Sectors 35
7.8 In Use Alternate Input (Activity LED)
:36
7.9 Write Protect Optional Use 36
7.10 Disk Change (Alternate Output) '
37
8.0 Operation Procedures
38
8.1
Diskette Loading and Handling 38
8.2 Write Protecting a Diskette . '
39
9.0 Error Detection and Correction '
40
9.1
Write Error
40
9.2 Read Error
40
Appendix A - Models and Features . '.'
41
ii
To Next Page
Loading...
