Need help?Do you have a question about the Shure Aonic 5 and is the answer not in the manual?
General| Cable color | Black |
|---|---|
| Headset type | Binaural |
| Product type | Headset |
| Product color | Red |
| Wearing style | In-ear |
| Detachable cable | Yes |
| Control unit type | In-line control unit |
| Recommended usage | Calls/Music |
| Storage temperature (T-T) | -29 - 74 °C |
| Operating temperature (T-T) | -18 - 57 °C |
| Package type | Hanging box |
| Cables included | Audio (3.5mm) |
| Audio adapters included | 6.3 mm |
| Accessories included in set | 3 sizes silicone eartips |
| Connectivity technology | Wired |
| Impedance | 36 Ω |
| Driver type | Balanced |
| Ear coupling | - |
| Headphone frequency | 18 - 19000 Hz |
| Noise canceling type | Active |
| Headphone sensitivity | 119 dB |
| Microphone type | In-line |
Weight and Dimensions| Weight | 24.5 g |
|---|
In small, medium, and large sizes. Made from pliable rubber.
Compress foam sleeve, insert, hold for ten seconds while it expands.
If desired, use scissors to trim the stem on the sleeve.
Use the included nozzle key to loosen the threaded collar, then pull gently on the nozzle.
Insert nozzle, align tabs, use key to tighten threaded collar.
To Next Page
