Shure BLX Wireless System - Advanced System Management; Multiple System Setup; Manually Setting Receiver Group and Channel; Locking and Unlocking Controls

2
BLX2
Back Panel
① DCPowerJack
② AdapterCordTie-Off
③ XLRmicrophoneoutputjack(MIC out)
④ 6.35mm(1/4")instrumentleveloutputjack
(instrument out)
BLX1
① LEDIndicator
Displays power and battery status (see
Transmitter LED Indicators).
② powerSwitch
Toggles power on or off.
③ 4-PinMicrophoneInputJack(TA4
connector)
④ Antenna
⑤ group Button
Changes group setting.
⑥ LEDDisplay
Displays group and channel setting.
⑦ channel Button
Changes channel setting.
⑧ BatteryCompartment
⑨ AudioGainAdjustment
Rotate to increase or decrease transmitter gain.
BLX2
① LEDIndicator
Displays power and battery status (see Transmitter LED Indicators).
② power Button
Push to turn power on or off.
③ group Button
Changes group setting.
④ channel Button
Changes channel and gain setting.
⑤ LEDDisplay
Displays group and channel setting.
⑨
⑥ IdentificationCap
⑦ BatteryCompartment
BLX4
BLX88
channel
group
-10 dB
BLX1
group
(A-Y)
channel
(0-9)
①
②
④
⑤
⑥
⑦
⑧
③
③
④
⑥
⑦
⑤
①
②
POWER
MIC OUT
INSTRUMENT OUT
12-15 V
160 mA
①
②
③
④
①
②
③
③
④
④
POWER
MIC OUT
INSTRUMENT OUT
12-15 V
320 mA
INSTRUMENT OUT
MIC OUT
English