Shure MXCWAPT Getting Started

More Information Available Online
A comprehensive online user guide is available at pubs.shure.com.
Getting Started
Set up the system access point (MXCWAPT)
PoE
Power over Ethernet (PoE)
Insert battery
Wi-Fi scan Channel selected
ConnectedSearching...
Speak Listen Ready to go!
Visit shure.com/mxcw for
more information
SBC930
MXCW640
MXCWAPT
Test the audio
Access point setup
Microphone unit setup
default
1. Connect the access point to Power over Ethernet (PoE) source to turn on the device.
2. Wait for the access point to scan the area.
3. The best Wi-Fi channel is automatically selected
Set up the microphone units (MXCW640)
PoE
Connect to power over ethernet
Insert battery
Wi-Fi scan Channel selected
ConnectedSearching...
Speak Listen Ready to go!
Visit shure.com/mxcw for
more information
SBC930
MXCW640
MXCWAPT
Test the audio
Access point setup
Microphone unit setup
default
1. Insert batteries to turn on the devices.
2. Wait for the microphone units to search for the default access point network (= default).
3. The units are ready when the LEDs stop flashing and the touchscreen displays the home-screen.
1/2©2017 Shure Incorporated
MXCW Getting Started

Shure MXCWAPT Specifications

General

Brand	Shure
Model	MXCWAPT
Category	Conference System
Language	English