Need help?Do you have a question about the Shure MXW1 and is the answer not in the manual?
General| Encryption | AES-256 |
|---|---|
| Modulation | GFSK |
| RF Output Power | 10 mW |
| THD | < 0.5% |
| Connector Type | Mini XLR |
| Polar Pattern | Omnidirectional |
| Technology | Digital |
| Operating Range | Up to 100 m |
| Dynamic Range | 100 dB |
| Charging Time | 2 hours |
| Connector | Mini-XLR |
| Operating Temperature | 0°C |
Highlights possible results of incorrect use, distinguishing between WARNING and CAUTION.
Provides instructions for installing and powering the system's hardware components.
Details on setting up single and multiple group systems for network connectivity.
Steps to access and use the MXW system's graphical user interface for management.
Process for assigning APTs, chargers, and output devices to form communication groups.
Procedure for linking microphones to channels via the charger or GUI.
Guidance on optimal placement of microphones for audio quality and noise rejection.
Details the hardware components and functions of the Access Point Transceiver (APT).
Explains the front and back panel features of the Audio Network Interface (ANI).
Describes the ports and capabilities of the 4-Port Network Interface on the ANI.
Overview of the Networked Charger's slots, LEDs, buttons, and ports.
Details microphone power, mute/active button, state LEDs, and battery indicators.
Categorizes microphone types and their primary uses and placement notes.
Defines the operational states of microphones: Active, Mute, Standby, and Off.
Information on Shure Lithium-ion batteries, recharging, monitoring, and replacement.
Guidelines for setting up a reliable network for Shure systems.
Explains common network configurations like star topology for Shure devices.
Illustrates a basic network setup using multiple Ethernet switches and a DHCP server.
Shows a network configuration involving multiple Ethernet switches and a DHCP server.
Depicts a network setup incorporating Wi-Fi routers with multiple Ethernet switches.
Steps to configure firewall settings on Mac and Windows for optimal system performance.
Recommendations for router settings, especially multicast rate, for Wi-Fi performance.
Tool to find Shure devices on the network and access their web interfaces.
Step-by-step guide to access the MXW system's Graphical User Interface (GUI).
Comprehensive management of system control and monitoring via a web browser interface.
Introduces Dante Controller and Dante Virtual Soundcard for network audio management.
Procedure for scanning the RF spectrum to identify available clear channels before installation.
Options for dynamic or manual RF gain adjustment to optimize coverage and battery life.
Guidance on coordinating frequencies with adjacent rooms to prevent interference.
Table showing average transmitter battery runtime based on RF power level settings.
Instructions for replacing microphones within the system's groups and charger slots.
Guidance for resolving issues related to audio, networking, and control software.
Information on radiation exposure limits, EMC, and product usage compliance.
Details FCC, IC, and CE compliance statements for the product and its components.
Provides technical specifications for the MXW system components.
To Next Page
