Do you have a question about the Shure PSM600 and is the answer not in the manual?
Receiver Type | Diversity |
---|---|
RF Output Impedance | 50 Ohms |
Type | Personal Monitor System |
Modulation | Wideband FM |
Transmitter Power | 10 mW, 30 mW, 50 mW (adjustable) |
RF Output Power | 10 mW, 30 mW, 50 mW (adjustable) |
Receiver Sensitivity | 1.2 μV for 12 dB SINAD |
Audio Input Connector (Transmitter) | XLR, 1/4" |
Power Supply (Receiver) | 9 V battery |
Signal-to-Noise Ratio | > 90 dB |
Connectors | XLR, 1/4" |
Weight | Transmitter: 2.2 lbs (1 kg) |
Step-by-step instructions for connecting and setting up the P6T transmitter.
Step-by-step instructions for connecting and setting up the P6R receiver.
Overview of the Shure PSM600 Personal Stereo Monitor System and its advantages.
Lists and illustrates the main components of the PSM600 system.
Highlights the key operational features and capabilities of the PSM600 system.
Details the front and rear panel controls, connectors, and indicators of the P6T transmitter.
Details the main controls, connectors, and indicators on the P6R receiver.
Explains the functionality and settings for customizing the P6R receiver operation.
Describes Stereo, MixMode, and Mono control modes for system configuration.
Demonstrates daisy-chaining multiple P6T transmitters using LOOP outputs.
Shows how to send audio signals for floor monitors via the P6T transmitter's LOOP connectors.
Details the PA705 for providing wireless coverage in a cardioid pattern.
Describes the PA760 for combining multiple P6T transmitters into a single antenna.
Introduces the P6HW hardwired version for users not needing wireless mobility.
Highlights Shure's SCL earphones designed for PSM systems delivering superior sound.
Provides solutions for issues where the receiver outputs no sound.
Offers troubleshooting steps for problems related to reduced receiver range.
Solutions for fuzzy or distorted audio experienced at the receiver.
Addresses issues causing low audio output volume at the receiver headphones.
Lists technical parameters such as frequency range, response, and operating range.
Details signal polarity and regulatory certifications for the system components.
Provides instructions and diagrams for rack mounting the P6T transmitter.
Describes how to front mount the antenna using supplied cables and adapters.