16
SINGLE MOUNT DUAL MOUNT
1. Insert the unit(s) into a 19-inch equipment rack.
2. Fasten the unit(s) to the rack using all four of the supplied screws.
Front Mounting the Antenna
When rack mounting units, use the supplied cable and bulkhead adapter to front
mount the antenna. This prevents other cables from becoming entangled in the antenna
and can greatly reduce RF interference.
NOTE: The PA715 antenna, which comes supplied with the P6T; cannot
be remote mounted. Use a PA705 antenna for remote mounting.
Mounting in an Equipment Rack
To Next Page
Loading...
