Shure SCM820 Digital IntelliMix - IP Ports and Protocols; Furnished Accessories

29
Furnished Accessories
Furnished Accessories
Hardware Kit (SCM820,
SCM820-DAN)
90A20082
Hardware Kit
(SCM820-DB25,
SCM820-DAN-DB25)
90BA8100
Ethernet cable 95A20437
Power Cable
region
dependent,
see table
USB Flash Drive 95A20438
Power Cable by
Region
Part Number
US 95B8389
Brazil 95A14336
Argentina 95A14335
Europe 95C8247
UK 95A8713
Japan 95B9021
China 95B9073
Korea 95B9074
Australia 95A9128
Shure Control
Port TCP/UDP Protocol Description Factory Default
21 tcp FTP
Required for firmware updates (otherwise
closed)
Closed
22 tcp SSH Closed
23 tcp Telnet Standard console interface Closed
68 udp DHCP Open
80 tcp HTTP Required to launch embedded web server Open
427 tcp SLP Required for service discovery Open
427 udp SLP Required for service discovery Open
443 tcp HTTPS Closed
161 tcp SNMP SNMP Closed
162 tcp SNMP SNMP trap Closed
843 tcp Flash Required for embedded Adobe Flash GUI Open
2202 tcp Required for 3rd party control strings Open
5353 tcp mDNS Required for device discovery Open
5568 udp SDT Required for device control Open
8023 tcp Telnet Debug console interface Password
8180 tcp Flash Required for embedded User Interface Open
8181 tcp Flash Required for embedded Event Log Open
8427 udp Multcast SLP Required for service discovery Open
Dante Audio & Controller
Port TCP/UDP Protocol Description Factory Default
162 udp SNMP Used by Dante
319-320 udp PTP Used by Dante clocking
4321 udp Used by Dante audio
4440-
4455
udp Used by Dante
5353 udp mDNS Used by Dante
8700-
8706
udp Used by Dante
14336-
14591
udp Used by Dante audio
16000-
65536
udp Used by Dante
IP Ports and Protocols