Shure SCM820 Digital IntelliMix User Manual (English)

Other manuals for Shure SCM820 Digital IntelliMix

User Manual33 pages

Overview2 pages

Questions and Answers:

A
Adam FloresAug 21, 2025
What to do if there is no audio or faint audio from my Shure SCM820 Digital IntelliMix?
- H
  hmaldonadoAug 21, 2025
  If you're experiencing no audio or faint audio from your Shure Mixer, here are a few things to check: * Make sure all cables are properly connected. * If using condenser microphones, enable Phantom power. * Verify the Input Gain Level. * Ensure the mix is unmuted. * Turn up the Master volume knob. * Check the channel routing from the IntelliMix tab in the GUI. * Examine the Link Group and Network LEDs.
A
Anne YoungAug 22, 2025
How to fix distorted audio on my Shure SCM820 Digital IntelliMix?
- K
  Kelsey BuckleyAug 22, 2025
  If you're getting distorted audio from your Shure Mixer, try the following: * Set the Analog Input to a lower level. * Turn down the master gain.
P
poolejohnAug 25, 2025
Why can't I connect to the GUI of my Shure SCM820 Digital IntelliMix?
- D
  David MasseyAug 25, 2025
  If you're having trouble connecting to the GUI of your Shure Mixer, consider these steps: * Make sure the mixer is powered on. * Properly connect the Primary port to the computer's network. * Disable any unused network interfaces on your computer, including WiFi. * If applicable, check that the DHCP server is functioning correctly. * Ensure Bonjour is running on your PC.
J
James MartinezAug 26, 2025
What to do if network audio is missing or distorted on my Shure SCM820 Digital IntelliMix Mixer?
- C
  Connie EatonAug 26, 2025
  If the network audio is missing or distorted on your Shure Mixer, you can try these steps: * Check the channel and mix gain. * Make sure the mixer has a stable network connection. * Use Dante Controller software (DC) to verify channel subscriptions. * Check the master clock in DC. * Use DC to properly route audio channels.
C
Charles BaileyAug 27, 2025
Why is the GUI slow on my Shure SCM820 Digital IntelliMix?
- T
  Timothy BrewerAug 27, 2025
  If the GUI is running slowly on your Shure Mixer, here are some potential solutions: * Ensure that five or fewer windows are open to the same GUI. * Disable software meters from the GUI Preferences tab.
J
Janet HicksAug 29, 2025
What to do if my Shure Mixer appears in the Shure Discovery application, but the web browser cannot connect to the device?
- P
  powersdannyAug 29, 2025
  If your Shure Mixer appears in the Shure Discovery application, but the web browser cannot connect, try these steps: * Download the latest version of Adobe Flash. * Ensure your PC and the mixer are on the same subnet.
T
Tracy SmithAug 31, 2025
How to fix no audio output for mixers in a Link Group for Shure?
- L
  Laura SmithAug 31, 2025
  If there's no audio output for mixers in a Link Group, check the following: * Turn up the master gain control. * Check the Global/Local setting for the Mix Outputs. * Wait until the group has reconfigured. * Ensure the mixer has been assigned to a Link Group from the Link Group tab of the GUI.
T
tclarkSep 1, 2025
Why is the GUI taking a long time to load on my Shure SCM820 Digital IntelliMix?
- A
  Amanda PerrySep 1, 2025
  If the GUI is taking a long time to load on your Shure Mixer, try the following: * Set the computer gateway to 0.0.0.0. * Set the router to not send default gateway as a part of DHCP. * Manually set the computer to a static IP address on the same network as the mixer.
Q
qgeorgeSep 3, 2025
How to unlock my Shure SCM820 Digital IntelliMix if I can't make adjustments?
- L
  laurenbrownSep 3, 2025
  If you can't make adjustments to your Shure Mixer, it may be locked. Here's how to unlock it: * Press and hold the lockout button on the back panel for 5 seconds to disable the lockout. * If the mixer is still locked, open the GUI and uncheck the Hardware Lockout button in the Preferences tab.
R
Richard BeckerSep 5, 2025
What to do if there is no audio from Shure Music Mixer?
- N
  Natasha RobertsSep 5, 2025
  If you're experiencing no audio or faint audio with your Shure Music Mixer, try the following: * Check the cables. * Enable phantom power for condenser microphones. * Verify the input gain level. * Ensure the mix is unmuted. * Turn up the master volume knob. * Check the channel routing from the IntelliMix tab of the GUI. * Check the Link Group and Network LEDs.