Need help?Do you have a question about the Shure V15 Type IV SUPER TRACK IV and is the answer not in the manual?
General| Frequency Response | 10Hz - 25kHz |
|---|---|
| Channel Separation | 25 dB at 1 kHz |
| Type | Moving Magnet |
| Output Voltage | 3.5 mV |
| Tracking Force | 0.75 - 1.25 grams |
| Recommended Load Impedance | 47k ohms |
| Stylus Type | Hyperelliptical |
| Channel Balance | 2dB |
| Compliance | 25 x 10^-6 cm/dyne |
Describes the issue of stylus mistracking with heavily modulated signals and potential record damage.
Explains how record warps affect stylus tracking force and vertical tracking angle.
Details how static electricity attracts the cartridge and discharges through the stylus.
Details the symptoms of dust accumulation on the stylus tip and its effects.
Describes how stylus assembly is subjected to shock upon accidental arm drops.
Presents a comparison of distortion levels for different stylus tip shapes.
Explains the two basic methods for mounting the cartridge in different types of tone arm shells.
Provides instructions for cleaning the Dynamic Stabilizer using the supplied brush.
Offers guidance on cleaning the stylus tip using a brush or cleaning solution.
Details the quality control program and testing for the V15 Type IV cartridge.
To Next Page
