Shuttle SH370V2 - Power Management Configuration

15
English
Wake Up by USB (S3)
This item allows you to enable or disable system wake up by USB (S3).

The choice: Enabled , Disabled.
EuP Function
This item allows you to enable or disable system EuP function in S4/S5.

The choice: Enabled , Disabled.
Power-On after Power-Fail
This item allows you to set system power on automatically after AC power
restored.

The choice: Power On, Former-sts, Power O󰘯, Power On by LAN, Power On
by RTC.

Power Management Con󰘰guration